9 tips for changing the oil and filter on Dodge vehicles

9 tips for changing the oil and filter on Dodge vehicles

Dodge is a famous automobile manufacturer with an excellent lineup of trucks and SUVs. While its vehicles are known for performance and durability, they must be maintained well. A fundamental aspect of car upkeep is changing the oil and filters regularly. Whether one owns a robust Dodge truck or a versatile SUV, understanding the nuances of oil and filter changes can help the automobile run smoothly and extend its lifespan.

The function of oil and filters in a vehicle
Engine oil is a lubricating fluid that circulates throughout the engine to reduce friction between moving parts, dissipate heat, and protect against wear and tear. The oil filter is responsible for removing impurities and contaminants from the engine oil. The filter is replaced during routine oil changes to maintain its filtration capabilities.

Tips for changing oil and filters in vehicles
Oil and filters play crucial roles in the vehicle’s engine, ensuring it operates efficiently and remains in good condition. If one follows these tips, it will not only ensure engine longevity but also contribute to better fuel efficiency and reduced emissions:

Use the right tools and materials
Before starting, it’s important to gather all the right tools. One will need an oil filter wrench to remove the old filter, a container to catch the old oil (like an oil drain pan), a set of sockets or wrenches, a funnel to pour in new oil, a new oil filter, and the right type and sufficient amount of oil. Using the right tools and materials not only simplifies the process but also ensures one performs the oil change accurately and safely.

Have safety gear handy
One should always work in a place where there’s fresh air and put on safety gear like gloves and safety glasses for protection. Gloves defend one’s hands from contact with hot oil, sharp tools, and potentially harmful chemicals, preventing burns and cuts. Safety glasses, on the other hand, shield the eyes from splashing oil and debris.

Warm up the engine
Cold engine oil is thicker and flows less freely. Warming up the oil can make it easier to drain out later during the oil change. As the oil warms up, it also suspends and carries away contaminants like dirt and debris, which might have settled in the engine. To warm the oil, one can start the car and let it run for a few minutes before beginning the work.

Use the right oil and filter
A particular Dodge model and engine type may require a specific oil viscosity and formulation to function at its best. Using the right oil ensures proper lubrication and protection. Conversely, using an incorrect filter may compromise the filtration process, potentially allowing harmful particles to circulate in the engine. One can find detailed information on the recommended oil type, viscosity, and filter specifications in the owner’s manual. One can also find this information on labels and product descriptions.

Lift the vehicle
One might need to lift the car off the ground a bit to reach the oil drain plug and filter. Individuals can do this with a car jack and jack stands, but one should ensure the vehicle is stable and safe before going underneath it.

Lubricate the new filter
Before putting on the new oil filter, one is advised to rub a little bit of clean oil onto the rubber ring around the top of the filter. This helps seal it properly, prevents leaks, and enables easy removal during the next oil change. One can screw on the new oil filter by hand.

Use a drain pan
The oil drain plug is like a little bolt, usually at the engine’s very bottom. Once the plug is loosened, remove it completely and let the old oil pour into the pan. Ensure the pan is in the right spot to catch all the oil. Using a drain pan prevents the oil from spilling onto the ground. This minimizes mess and cleanup and reduces the risk of environmental contamination and safety hazards.

Check the oil level and start the engine
Checking the oil level and starting the engine after an oil change is crucial to verify if the correct amount of oil has been added. It also lets the new oil to circulate throughout the engine. This ensures all engine components are properly lubricated, minimizing friction and wear and maintaining optimal engine performance and longevity. Additionally, it helps identify potential leaks or issues with the oil system before resuming regular vehicle operation.

Check for oil leaks
After changing the oil and filter, one is advised to monitor the vehicle for oil leaks in the days following the maintenance. One should address any leaks promptly by tightening the drain plug or oil filter and replacing damaged gaskets or seals. It helps prevent potential engine damage and oil loss.

How frequently should one change the oil and filters?
Changing a vehicle’s oil is a critical aspect of regular maintenance. The frequency at which one should do it depends on various factors, including the type of oil one uses, driving habits, and the manufacturer’s recommendations. On average, for many modern vehicles that use conventional oil, changing the oil every 7,000 to 10,000 miles is often recommended. However, one should ideally go by the vehicle manual, as some oil formulations may allow longer intervals between oil changes.

When it comes to oil filters, here are a few warning signs they need a change:

  • Reduced engine power and acceleration
  • Decreased fuel efficiency
  • Unusual engine noises, such as wheezing or rattling
  • Visible buildup of dirt and debris on the filter itself
  • Engine overheating due to poor cooling
  • Dark or thick engine oil
  • Maintenance light illuminated on one’s dashboard
  • Emission of dirty exhaust fumes

Popular Articles

01

4 essential vitamins for optimum eye health

The eyes are complex organs and need a variety of nutrients to function optimally. Many common health conditions like glaucoma, cataracts, age-related macular degeneration, diabetic retinopathy, and others can negatively affect our eyes, which may lead up to a complete loss of vision. While some conditions like moderate astigmatism can be corrected using contact lenses or eye lenses, others can be prevented by consuming a healthy dose of these 4 vitamins: Vitamin A Vitamin A deficiency is one of the most common causes of blindness globally. Vitamin A plays a crucial role in maintaining a clear cornea (outside the covering of the eye). A person with this vitamin deficiency may find their eyes not producing enough moisture to stay lubricated. It is also essential for maintaining the eyes’ light-sensing cells called photoreceptors. A deficiency of vitamin A can also lead to xerophthalmia, a progressive eye disease that begins with night blindness. Continued deficiency can lead to the drying up of the eyes and tear ducts, and softening of the cornea, resulting in irreversible blindness. To maintain eye health, it is recommended to eat vitamin-A-rich foods, like sweet potatoes, leafy greens, pumpkins, squash, bell peppers, carrots, dairy products, egg yolks, and liver.
Read More
02

Avoid these 5 smartphone habits

For most people, it is next to impossible to get through the day without using smartphones at least a few times. You need to make calls, check updates on the go, and even use smart navigation systems on your phone. But some smartphone habits can severely hamper productivity, affect your health, and may make you overly dependent on the gadget. So, here are five smartphone habits to keep in check: Using an alarm app Using your phone as an alarm clock might seem completely harmless. After all, apps on the phone let you set multiple alarms. But it never stops at hitting the snooze or dismiss button once you wake up. You will be tempted to check your phone for messages and social media, which will delay getting out of bed. Opt for a conventional alarm clock and keep your phone away from you at night to avoid checking anything after getting up. Ignoring software updates Smartphone care is as important as learning how to use the device in moderation. Many people make the mistake of postponing crucial software updates and granting necessary application permissions. These habits make the device extremely vulnerable to cyber-attacks that can access confidential data. Always keep your phone updated to ensure the latest security updates are installed.
Read More
03

7 foods that help fight against Bronchitis

When you have bronchitis, it’s easy to overeat greasy, salty, or sugary foods to relieve the coughing, breathing, and throat pain. Alternatively, you may decide not to consume anything at all. However, you should take care and watch what you eat as refined carbs and saturated fats might impede recovery. Knowing which foods to avoid and which to eat may influence the severity of bronchitis symptoms. Here’s a list of a few items you should avoid. Foods with preservatives and additives Sulfites, a form of preservative, may aggravate bronchitis. Liquor, dried fruits, pickled foods, maraschino cherries, and lime juice all contain sulfites. Processed and quick meals frequently contain chemical additives, flavors, and colorings. Some bronchitis patients may be susceptible to or intolerant to these artificial components. Gas-forming foods Eating large meals or gas-producing foods strains the diaphragm, especially if you suffer from acid reflux. This can cause chest pains and asthma flare-ups. Beans, cabbage, carbonated beverages, onions, and fried dishes are examples of these foods. Sugar and HFCS Do you enjoy drinking sugar-laden colas? Be cautious. They can be dangerous to your health. Avoiding syrups, candies, and other sugary foods will help to relieve symptoms such as coughing, irritation, and discomfort in your lungs.
Read More